L200

L200_REAR.jpg

GAIN
28dB maximum, 0dB at 12 o'clock pot position

NOMINAL LEVELS
+4dBu in, +4dBm out to 600 ohm balanced load.

PEAK LEVELS 
+24dBu in, +22 dBm out to 600 ohm balanced load. 

NOISE
20kHz B.W. -90dBm maximum output.

HARMONIC DIST. 
.02% Max at Peak Level 20Hz to 20 kHz .005% max. at Nominal Level

FREQUENCY RESPONSE 
+/- .25dB, 20 to 20,000Hz

CROSSTALK
70dB mimimum at 10kHz

INPUT IMPEDANCE
Balanced, 40kohm bridging

OUTPUT IMPEDANCE
Balanced, 40 ohms maximum Zs

DIMENSIONS
1.5"H by 5.5"W by 5.75"D; 1.5 lbs.

CONNECTORS
XLR (balanced input/outputs)

POWER 24VDC @ .07A , connector sleeve is positive. 

MOUNTING
21075-501 Rack mount kit.

POWER SUPPLIES
All units require 24VDC power supply which is ordered separately. Nanoamps can share a single supply using loop thru DC cable (P/N 20602-1). Do not exceed rated supply current. WA100-1 Wall mount power supply (UL) , 24VDC @ .4 amp, 115 VAC/60 Hz. WA100-2 Table top power supply, 24VDC @ .4 amp, 230 VAC/50-60 Hz with IEC 320 male 3 pin AC input connector. User supplies matching AC line cord for local power system. 20602-1 DC power cable assembly for looping the DC power between NanoAmps. 

WARRANTY
Limited, One Year Warranty