SUM100

SUM100_REAR.jpg

GAIN
+28dB Maximum

NOMINAL LEVELS 
+4dBu in, +24dBm Out to 600 ohm balanced load

PEAK LEVELS
+22dBu in, +24dBm out to 600 ohm balanced load

NOISE 20kHz B.W.
-90dBm maximum output

HARMONIC DISTORTION 
.02% Max. at Peak Level

20Hz to 20 kHz 
.005% Max. at Nominal Level

FREQUENCY RESPONSE
+/- .25dB, 20 to 20,000 Hz

CROSSTALK 
70dB Minimum at 10kHz

INPUT IMPEDANCE 
Balanced, 40k Ohm bridging

OUTPUT IMPEDANCE 
Balanced, 40 Ohms Maximum

DIMENSIONS 
1.5"H by 5.5"W by 5.75"D; 1.5 lbs.

CONNECTORS 
XLR (Balanced input/outputs)

POWER
24VDC @ .07A, connector sleeve is positive

MODEL NUMBERS
SUM100 & SUM100-RCA

POWER SUPPLIES
All units require an external 24VDC power supply (WA100-1 supplied as standard). NanoAmps can share a single supply using loop thru DC cable P/N 20602-1. Do not exceed rated supply current.

WA100-1
Wall mount power supply (UL) 24 VDC @ .4 Amp, 115 VAC/60 Hz.

WA100-2
Table top power supply, 24 VDC @ .4 amp, 230VAC/50-60 Hz with IEC 320 Male 3 pin AC input connector. User supplies matching AC line cord

20602-1for use with local power system.

DC power cable assembly for looping the DC power between NanoAmp units.

WARRANTY
Limited, One Year Warranty