Home News Support Company Contact Where To Buy Discontinued    
  E-Newsletter Sign Up
Login ...
User ID
Password
 
 
  DDA212-XLR
Search : 
 
  Key Features   Specifications   Images   Manual   Brochure    
DDA-212 Series 2 Digital Audio Distribution Amplifiers are designed to regenerate, isolate
and distribute digital audio data formatted in accordance with specifications AES3-1992 and
IEC 958. This is commonly called AES/EBU formatting or AES3.

DDA-212 Series 2 units have two inputs and 12 outputs, with the assignment of inputs and
outputs configurable from a front panel switch. The unit may be operated as a Dual 1X6 or
as a 2-Input 1X12, depending on the Input Select switch setting. The selected input feeds
AES audio to either six or all 12 separate outputs.

A front panel switch selects either re-clocking or non-reclocking of the input signal. In most
cases, re-clocking is preferred, as this feature improves the integrity of weak or distorted
input signals. Re-clocking may be switched off to allow distribution of AES sync signals,
Dolby E encoded AES signals, or other signals that should not be re-clocked.

DDA-212 Series 2 units work with AES signals that contain sample rates from 27 through
192kHz and 16-bit through 24-bit density, thus permitting very high resolution signals to be
distributed.

The front panel displays full status of the input signal, including Sample rate, Word Length,
Digital Errors and Pro or Consumer Mode.

DDA-212 Series 2 units contain a unique automatic equalization function that can adjust for
extremely long input lines. Equalization works independently for each input. A Front Panel
Lock feature protects all your settings.

The Model DDA-212XLR uses XLR connectors and operates from and drives a 110-ohm
balanced shielded twisted pair distribution system per AES3-1992.

Input Loop-through connections for each of the two inputs are provided to permit multiple
units to be stacked, or to insert the DDA-212 into your digital workflow. Switchable line
termination is provided. Standard practice dictates that the last AES input be terminated;
therefore, if you are not using the loop-through feature, Input Termination should be
switched ON.

FEATURES
• Configurable for Dual 1X6 or 2-Input 1X12 operation
• Accepts sample rates from 27 to 192kHz
• Displays standard sample rates of 32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz
• Displays Word Length of 16, 18, 20 and 24 bit
• Status and error LEDs show clock lock and data validity
• Automatic input equalizers compensate for very long cable runs
• Switchable re-clocking regenerates stable data before distribution
• Loop thru transformer balanced and isolated inputs
• Switchable input termination
• Individual, transformer balanced and isolated 110-ohm XLR outputs
• Two front-panel-selectable inputs
• 12 outputs
• Front panel control locking system
• Quiet, internal linear power supply (DDA-212XLR Input voltage is 115Vac. But it
      has a 230Vac version also, just add “230V” at the end of the model number to
      order it).
• Attractive and rugged 1RU package

Download Adobe Acrobat
Quick Contact : warranty@daysequerra.com
Privacy Policy Terms Of Use
Copyright 2017 DaySequerra Corporation. All rights reserved.