8 Channel Line Amplifier
Multiple Amplifier Arrays provide you with either four or eight identical Line or Microphone Amplifier channels depending on the model selected. These channels may be used as individual independent and isolated amplifiers or they may be combined at internal summing points brought out to the rear connector to form mixers, summing amplifiers, distribution amplifiers etc.
Multiple Line Amplifier Arrays (MLA) apply balanced or unbalanced line level input signals directly to a differential input stage with good common mode rejection and RC bypassing of any RIF signals picked up on the inputs. This stage will accept line levels up to +22dBm (10Vrms) without clipping and has a typical equivalent input noise (EIN) of only -96dBm thus yielding a 118dB dynamic range. More to the point, even with line inputs as low as -20dBm, you will maintain a 76dB S/N ratio. An input impedance greater than 30,000 ohms is high enough to avoid loading of even IHF (phono jack output) lines. A bi-fet input IC (LF347) provides fast and symmetrical slew rate performance along with high loop gain for minimum transient and harmonic distortion generation.
MLA800-1
8 Channel Line Amplifier - Transformer Balanced Outputs
$969
MLA800-2
8 Channel Line Amplifier - Active Balanced Outputs
$759